Drylining, Plastering & Render

View as
Sort by
Display per page

3 in 1 Basecoat 2.5 Litre

Size: 2.5 litres.

£21.17 incl VAT

3 in 1 Basecoat 5 Litre

Size: 5 litres.

£35.96 incl VAT

Crack-Free Ceilings Smooth Matt 2.5 Litre

Size: 2.5 litres.
Finish: Matt.

£17.62 incl VAT

Crack-Free Ceilings Smooth Matt 5 Litre

Size: 5 litres.
Finish: Matt.

£29.96 incl VAT

Crack-Free Ceilings Smooth Silk 2.5 Litre

Size: 2.5 litres.
Finish: Silk.

£17.62 incl VAT

Deep Gap Filler 1 Litre

Everbuild Deep Gap Filler is a revolutionary filler that is formulated using ceramic spheres that fill most holes and cracks, especially deep holes up to 50mm. Works in just one quick application with no need for secondary filling to level off.

Deep Gap Filler will not shrink, sag or crack and dries to a light grey finish. It gives a smooth finish, requiring little or no sanding and can be ready to paint or wallpaper in just 30 minutes.

It can be used for repairs to wood, plaster, masonry, cement, stone, brick and rendering.

Size: 1 Litre.

£4.97 incl VAT

Easy On Filling & Jointing Compound Sack 5kg

Tetrion Easy On, filling and jointing compound is newly developed and ideal in dry wall systems as a 2-coat filler (filler and finishing coat). It can also be used as a high performance, high quality filler for deep and shallow cracks, and gaps in wood, plaster, stone and brickwork, giving a smooth, sandable finish. Tetrion Easy On is rapid set, does not slump, is shrink resistant and gives high coverage.

£11.01 incl VAT

Fill & Skim Tub 5 Litre

Everbuild Fill & Skim is a revolutionary ready-mixed plaster substitute, formulated using lightweight polymer spheres to produce an easy-to-spread and smooth product which enables all tradesmen and DIY enthusiasts to produce a quality finish, normally only associated with a time served plasterer.

Fill & Skim dries to a hard but flexible finish and is therefore suitable for wall or ceiling application. It will fill holes down to 25mm in one application. It is the ideal choice for covering textured paint surfaces and for restoring old pitted/uneven plastered walls/ceilings in just one quick application.

Fill & Skim is also the ideal choice for electricians, plumbers, joiners and general builders as a one coat patching plaster for small repair jobs, e.g. over recessed cable trunking and around holes in walls where piping/sockets have been installed.

Once dry, Fill & Skim will not shrink, sag or crack and is ready to paint or paper 24 hours after application and finishes smooth and requires little or no sanding. It can be used for internal repairs over plaster, wood, brick, stone and rendering.

£26.94 incl VAT

Filler Coat 5 Litre

Everbuild FILLCOAT5 Filler Coat is a thick base coat for use on imperfect surfaces like walls and ceilings etc, prior to painting. It will simply cover and seal in one application.

FILLCOAT5 is supplied as 5 Litres in a plastic re-sealable tub for easy use and storage.

This Everbuild FILLCOAT5 hides and obliterates areas that have been filled badly at some stage, as well as covering and preventing the reappearance of hairline cracks.

This Everbuild product works like a roll-on filler, the thick formula completely covers strong colours and is ideal for use on walls and ceilings.

£35.21 incl VAT