Table/Contractor Saws & Metal Cutting Bandsaws

View as Grid List
Sort by
Display per page

DCS7485N FlexVolt XR Table Saw 18/54V Bare Unit

The DEWALT DCS7485N FlexVolt XR Table Saw is supplied as a Bare Unit, NO battery or charger supplied.

£968.00 incl VAT

TC-TS 2025/1 U Table Saw 2000W 240V

The Einhell TC-TS 2025/1 U Table Saw is a powerful device, that can make exact longitudinal cuts and angle cuts in solid wood, fibreboard and many other materials. The height and angle of the blade can be adjusted individually using the 2-in-1 saw blade adjustment. The powder-coated table width extension and the length stop rail allow particularly wide work pieces to be sawn without any problem.


2-in-1 saw blade adjustment (height, angle 0°-45°).
Table width extension for wide work pieces.
Saw blade guard with chip extractor connection.
Parallel stop with eccentric clamp.
Cross stop with angle scale (± 60°).
Housing with chip extractor connection for a clean workplace.
Includes base frame for stability, holder to wrap the power cord and holder for tools.
Push stick holder.


Input Power: 2,000W
Blade: 250 x 30mm Bore
No Load Speed: 5,000/min.
Depth of Cut: @90º: 85mm, @45º: 65mm
Swivelling Blade Range: 45°
Continuous Height Adjustment: 0-85mm
Dust Extraction Diameter: 36mm
Working Height: 830mm
Table Size: 640 x 487mm
Weight: 18.8kg

£158.00 incl VAT

BS250/AW Stand & Wheel Kit For BS250

The Record Power BS250/AW Stand & Wheel Kit provides great flexibility for those with a small workshop or for people who may need to move the machine on a regular basis.

Simply depress the foot pedal and the machine is lifted onto castors for easy movement, press the foot pedal again to lower the bandsaw onto its legs again.

£116.00 incl VAT

M18 FTS210 ONE-KEY™ Cordless Table Saw 18V 1 x 12.0Ah Li-ion

The Milwaukee M18 FTS210 ONE-KEY™ Cordless Table Saw delivers the power to rip cut at the same feed rate of an equivalent AC saw.  Fitted with the next generation POWERSTATE™ brushless motor, Milwaukee's most powerful motor utilising higher grade magnets and 175% more copper vs previous motors.

Its rack and pinion sliding fence allows the fence to be adjusted accurately and easily from the front of the saw, giving 622mm of rip capacity.  Quick-change guard and riving knife, remove and adjust the riving knife and guard without removing the throat plate.  It also features an integrated carry handle for easy transportation and on-board storage for all table saw attachments.

REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load.  Supplied with 1 x 18V REDLITHIUM-ION™ HIGH OUTPUT™ 12.0Ah battery pack that provides superior pack construction, electronics and fade-free performance.  With the ability to cut 190m of 19mm OSB board on one charge.

ONE-KEY™ tool tracking and security offers a cloud-based inventory management platform that supports both location tracking and theft prevention.

Supplied with a vacuum adaptor that fits directly to all Milwaukee® dust extractors.


No Load Speed: 6,300/min.
Blade: 210 x 30mm Bore
Ripping Capacity: 622mm
Depth of Cut: @90º 63mm
Bevel Capacity: 47°
Charge Time: 130 min.
Weight: 22.3kg

£1,042.00 incl VAT

DP16B Bench Drill with Cast Iron Handwheel

The Reord Power DP16B is a good quality, dedicated drilling machine and an indispensable tool in any workshop. The DP16B brings this versatility, along with traditional Record Power build quality and reliability, within easy reach of the home woodworker and discerning DIY enthusiast.

A wide variety of bits can be accepted and the 5 speeds allow for a great variety of materials to be drilled, including wood, metal, plastic and many others.

The cast iron table can tilt up to 45º and will accept most drill press vices, allowing secure holding for increased accuracy and safety. When extra capacity is needed, the table can be moved to the side of the machine so the base can be used as a working table, which also accepts drill press vices.

For further strength and performance, the headstock also features cast iron, adding weight to reduce vibration, along with a cast iron handwheel. The DP16B also features an accurate, positive depth stop, ideal for accurate repeat boring.


Input Power: 1/4 hp
Chuck: 2 Morse Taper / 13mm
Throat Depth: 102mm
Depth of Feed: 50mm
Chuck to Table: 170mm
Chuck to Base: 295mm
Size: H580 x W190 x D410mm
Weight: 17kg

£175.00 incl VAT

D28710 Metal Cut Off Saw 355mm 2200W 240V

DEWALT D28710 355mm Metal Cut Off Saw 2200 Watt 240 Volt Version.

£329.00 incl VAT

DCS690X2 FlexVolt XR Cordless Cut Off Saw 18/54V 2 x 9.0/3.0Ah Li-ion

This DEWALT DCS690X2 FlexVolt XR Cordless Cut Off Saw is supplied with:

2 x 18/54V 9.0/3.0Ah Li-ion Batteries.
1 x Charger.

£1,595.00 incl VAT

KGS 305M Cross Cut Mitre Saw 1600W 110V

Metabo KGS 305M Cross Cut Mitre Saw 1600W 110V Version.

£380.00 incl VAT

BS9 Hobby Bandsaw 300W 240V

The Record Power BS9 Hobby Bandsaw is ideal for the compact workshop and for those who require a robust, reliable and powerful machine for smaller scale work. It gives exceptional performance and capacities for a bandsaw of its size and is designed for consistently effective cutting and longevity.

The band wheels are dynamically balanced and are heavily built for a machine of this size, providing impressive torque and power. The table tilts up to 45º on a solid trunnion which features an easy to read scale. With rack and pinion blade guide adjustment for accurate positioning of the blade guides with excellent support.

Instantly release or re-engage tension using the lever on the rear of the BS9. This makes changing blades much quicker and easier, with the additional benefit of allowing the previous blade tension to be instantly re-applied. The blade tension system is designed to easily cope with all compatible blades.

The cam action release mechanism locks the fence in position quickly and features tension adjustment to achieve the perfect clamping strength.

£243.00 incl VAT