Concrete Waterproofing

BeSealed® fixing glue guarantees quick and robust adhesion of water-swelling sealing bars to concrete. The rapid formation of a skin and curing process allows for concrete casting within a few hours. Additionally, BeSealed® fixing glue offers excellent adhesion strength, even on damp concrete surfaces. This fixing glue is suitable for use with both Polybar+ and Bentobar+.

Unique design that is the intellectual property (RCD) of BeSealed. Water-swelling strip seal specially designed to waterproof plastic pipes through concrete structures.

The Sealing Connector is the ideal solution for robust concrete structures where formwork tie bars remain in place. Additionally, the Sealing Connector is made from synthetic, water-swellable rubber that completely prevents moisture infiltration.

The Sealing Plug is a groundbreaking solution for sealing structural concrete formwork spacers. Sealing Plugs consist of a water-swellable rubber cap and a solid core. The cap prevents water from seeping into the bar, while the core offers a mechanical anchor capable of withstanding water pressures up to 6 bar.

The Sealing UFO is the ideal solution for addressing water infiltration around formwork spacers and the adjacent concrete. Sealing UFOs prevent water from penetrating through cracks in the concrete surrounding formwork spacers.

BeSealed® water-swellable paste is a high-quality, single-component polyurethane adhesive that swells upon contact with water. When exposed to water, the paste can expand by up to 450% of its original volume. It can be used with both Polybar+ and Bentobar+.

The Kalsomine K-BRUSH is a versatile paste brush crafted for effective application and cleaning tasks, ensuring comprehensive coverage with ease of use. It excels in a range of applications where precise and efficient brushing is essential. Simply dip the brush into the paste or solution and apply as required, making it a practical choice for various projects.

GP Crystalline Active Barrier (CAB) Flex 2C is a fast-drying, two-component grey waterproofing coating system. The A component is a cement-based powder, while the B is a liquid polymer. The presence of the polymer makes the coating system semi-flexible.

The GP DPC Rolls are crafted as a single-layer, embossed damp proof course with high-performance capabilities, engineered to resist Methane, Carbon dioxide, Radon, and Moisture. They meet stringent standards set by BRE, CIRIA, and BSI (BS EN 14909 and BS8485:2015), ensuring excellent mortar adhesion. This makes them well-suited for vertical and horizontal applications in buildings taller than three storeys.

GP Primer is a specifically developed low-viscosity primer, thinned with an aromatic hydrocarbon to improve tolerance to damp substrates and ensure superior bonding with membranes, surpassing conventional bituminous primers. Its black hue and fluidity make it ideal for use on green concrete, masonry, metal, and wooden surfaces.

GP Sealant is a novel, low modulus expansion joint sealant and adhesive, specially formulated to ensure a bubble-free cure even under high temperature and humidity conditions. The product exhibits excellent thixotropy, allowing its use even in very large voids.

GP TITANBOND is a fully bonded waterproofing membrane that combines the GP TITANBOND membrane with a durable virgin polypropylene geotextile. It is designed for gas, water, and tanking protection of underground structures where harmful ground gases are anticipated.

A 300mm wide by 20m long single-sided self-adhesive tape, designed for use as an under-tape to create lap joints with Titan Bond.

GP TITAN TAPE is double-sided tape features release film on both sides to facilitate easy installation. GP TITAN TAPE is crafted to prevent water, water vapour, air, and gas passage, making it ideal for building construction with damp proof membranes, vapour control layers, and ground gas barriers.

GP TITANTANK is consists of a self-adhesive layer with an upper surface of GP TITANFLEX and a lower surface of siliconised polypropylene release film. TITANTANK is used for gas-proofing, waterproofing, and tanking underground structures where harmful ground gases are anticipated, serving as a post-applied fully bonded membrane.

HYDROLOCK is a mechanically bonded Geosynthetic Clay Liner (GCL) composite comprising pulverised bentonite enclosed between two layers of geotextile. The internal 5 kg of natural sodium bentonite swells upon contact with water to create a low-permeability waterproofing barrier.

Hydrolock Paste is a plastic bentonite paste, specially formulated for structural waterproofing purposes. It is applied to seal and safeguard concrete areas in direct contact with soil. Common applications include sealing pipe penetrations, shafts, levelling voids, and filling honeycombs.

Hydrolock Rail is a galvanised steel wire mesh specifically designed to be used with the Hydrolock Strip. The Hydrolock Rail prevents the displacement of the strip during concrete pouring. It is supplied at a width of 30mm and in lengths of 1.0m.