Concrete Waterproofing

The inclusion of the Hard-Cem integral admixture not only substantially reduces the necessity for replacements and repairs but also prolongs the lifespan of the concrete by more than double. This leads to a decreased carbon footprint over the entirety of its existence.

GP TITAN TAPE is double-sided tape features release film on both sides to facilitate easy installation. GP TITAN TAPE is crafted to prevent water, water vapour, air, and gas passage, making it ideal for building construction with damp proof membranes, vapour control layers, and ground gas barriers.

Krytonite Swelling Waterstop is a synthetic rubber waterstop that uses swelling pressure to seal concrete construction joints and stop water.

Krystol Repair Grout is a crystalline concrete waterproofing product that stops the flow of water to permanently repair leaking cracks, holes and joints in concrete, and can also be used to resurface and waterproof defective, damaged or deteriorating concrete. The grout employs advanced fiber technology and shrinkage controlling additives to prevent cracking.

GP TITANTANK is consists of a self-adhesive layer with an upper surface of GP TITANFLEX and a lower surface of siliconised polypropylene release film. TITANTANK is used for gas-proofing, waterproofing, and tanking underground structures where harmful ground gases are anticipated, serving as a post-applied fully bonded membrane.

Krystol Plug is a rapid-setting hydraulic cement product that when mixed with water is used to stop flowing water and repair leaking cracks, holes and joints in concrete.

HYDROLOCK is a mechanically bonded Geosynthetic Clay Liner (GCL) composite comprising pulverised bentonite enclosed between two layers of geotextile. The internal 5 kg of natural sodium bentonite swells upon contact with water to create a low-permeability waterproofing barrier.

Krystol T1 is a surface applied crystalline slurry treatment that transforms new or existing concrete into a permanent waterproofing barrier.

Hydrolock Paste is a plastic bentonite paste, specially formulated for structural waterproofing purposes. It is applied to seal and safeguard concrete areas in direct contact with soil. Common applications include sealing pipe penetrations, shafts, levelling voids, and filling honeycombs.

Kryton Crack Inducing Waterstop K-341 is a tailored solution crafted to establish effective waterproof crack control joints. Incorporated into the comprehensive Krystol Waterstop System alongside Krystol Waterstop Grout, it showcases outstanding resilience against waterborne chemicals.

Hydrolock Rail is a galvanised steel wire mesh specifically designed to be used with the Hydrolock Strip. The Hydrolock Rail prevents the displacement of the strip during concrete pouring. It is supplied at a width of 30mm and in lengths of 1.0m.

Krystol Broadcast is a dry shake crystalline waterproofing treatment that converts freshly poured concrete into a durable waterproof barrier. During the final finishing stages, Krystol Broadcast integrates seamlessly with the concrete, replacing the necessity for conventional membrane waterproofing systems. Its distinctive fugitive dye guarantees uniform dispersion, achieving a sleek surface finish suitable for non-air entrained slabs.