Cutting & Grinding

Strong, flexible long-life carbon steel junior hacksaw blades.

General purpose blades for cutting mild steel or soft nonferrous metal. Packed five blades - two 18 TPI and three 24 TPI - on display card.

High speed steel with 5% cobalt. Long-lasting and hard wearing. Cuts any metals including alloys, steels and stainless steels.

Hardened high speed steel designed to cut hard materials such as mild sheet, aluminum abd other non-ferrous metals. MWS- Milled & wavy set teeth fine cut blades. This pattern gives a clean, straight cut. Straight fine cut blade. (bosch equiv. T118A)

High quality carbon steel for use with softer materials, such as hard and soft wood, plastics and laminated boards. GTG- Ground & taper ground teeth. These top quality blades give a clean, quick cut into both wood and plastic. Straight cut blade. (bosch equiv. T101BR)

These high carbon steel (HCS) Jigsaw Blades providing a straight clean cut, suitable for softwood, laminate board and plastic. The HCS body has high strength at lower temperatures. Grout & taper ground (GTG) teeth give a clean quick cut.

For fast, straight cutting of softwood, timber sheet, plastic pipes and profiles. Bayonet fitting HCS blade with side-set milled teeth. Working length 75mm.

High quality carbon steel for use with softer materials, such as hard and soft wood, plastics and laminated boards. GTG- Ground & taper ground teeth. These top quality blades give a clean, quick cut into both wood and plastic. Straight cut blade. (bosch equiv. T144D)

High quality carbon steel for use with softer materials, such as hard and soft wood, plastics and laminated boards. GTG- Ground & taper ground teeth. These top quality blades give a clean, quick cut into both wood and plastic. Straight cut blade. (bosch equiv. T111C)

Addax Reciprocating Saw Blades - Metal Cutting - Bi-Metal

High carbon steel (HCS) Reciprocating Saw Blades are suitable for all wood, man-made board and plastic. The HCS body has high strength at lower temperatures. Side set & sharpened (SSS) teeth give a fast, medium cut.

High quality carbon steel for use with softer materials, such as hard and soft wood, plastics and laminated boards. GTG- Ground & taper ground teeth. These top quality blades give a clean, quick cut into both wood and plastic. Straight cut blade. (bosch equiv. T101D)

Suitable for cutting softwood, chipboard, wood core plywood, or fibre board (3-30mm) Straight and clean cut T-Shank fitting High carbon steel Teeth per inch: 10 Length of the blade: 100mm

DEWALT Bi-Metal Reciprocating Blades for extreme applications, as well as demolition work. They have a bi-metal construction, combining a HCS body and cobalt-alloyed HSS cutting teeth for increased flexibility and durability. Aggressive tooth geometry with a special angle for a fast and effective removal of material, especially for tensile and abrasive metals. Universal shank fits all major brands including DeWalt, Bosch, Hitachi, Flex, Makita, Metabo, Skil.

Norton Clipper Metal Grinding Disc 6 x 230mm (T x Dia) is designed for removing excess material such as welds, bevelling and edge grinding. This disc free from iron, sulphur and chloride helps eliminate contamination while grinding. It has maximum operating speed of 80 meter per second.

Norton Clipper Flat Metal Cutting Disc 2.5 x 230mm (T x Dia) is used for cutting through hard as well as thick materials. Produces straight and accurate cuts with reduced down time. The centre bore measures 22.23mm in diameter. Ideal for cutting all metals including stainless steel.

Norton Clipper Flat Metal Cutting Disc 3.5 x 300mm (T x Dia) is used for cutting through hard as well as thick materials. Produces straight and accurate cuts with reduced down time. The centre bore measures 22.23mm in diameter. Ideal for cutting all metals including stainless steel.

The Norton Clipper Flat Metal Cutting Disc is often used in hand-held, specialized power tool ideal for cutting hard materials such as ceramic tiles, ferrous metal at greater speeds. It measures 115 x 2.50 x 22.23mm (Dia x T x Bore Dia). The ultra-thin design allows for more precise cuts and draws less power from the grinder. The cutting speed is very high, which reduces the amount of metal removed and the heat generated. Made in the United States of America, this disc is used in both domestic and commercial purposes. Norton provides high-quality services for exterior construction products and offers a wide range of performant diamond blades, saws and core drills.

Norton Clipper Metal Grinding Disc 6 x 115mm (T x Dia) is used for removing excess material from welds. Developed for ultimate smooth performance and consistent grinding of stone materials. The centre bore measures 22.23mm in diameter. Ideal for cutting all metals including stainless steel.