Drainage

Fernco, previously known as Flexseal, Drain Dye is a non-toxic and odourless drain tracer product for finding leaks, drain damage, contamination and water pathways. It is easy to use, non-harmful and highly concentrated.

“Double Seal” plugs can be supplied to order. Thrustwashers fitted as standard on all plugs 9” (225mm) & above. Zinc plated – corrosion resistant to 90 hours salt spray test. Combines the economy of price with the strength of steel. Carries the Horobin name – quality guaranteed. Nominal pipe sizes, minimum & maximum pipe diameters each Plug will fit. It is the responsibility of the installer / operator to make sure the maximum allowed back pressure of HOROBIN pipe stoppers are not exceeded.

“Double Seal” plugs can be supplied to order. Thrustwashers fitted as standard on all plugs 9” (225mm) & above. Zinc plated – corrosion resistant to 90 hours salt spray test. Combines the economy of price with the strength of steel. Carries the Horobin name – quality guaranteed. Nominal pipe sizes, minimum & maximum pipe diameters each Plug will fit.

The answer to a variety of pipe sealing problems. Range available for pipe diameters from 25mm to 450mm. Easily inflated for trouble free pipe sealing. Ideal for use in areas where access is smaller than the test diameter. Extension hose available to facilitate remote sealing. PVC Bags are supplied with 1.2mtr or 3mtr hose as standard, but can be manufactured with longer hose to facilitate remote sealing when required. To create an air tight seal in pipes for a back pressure of 4"/100mm U Gauge, as requested by British Standards. PVC AIR BAGS ARE INFLATED WITH A HAND PUMP HOROBIN CODE 84011

Flexseal Adaptor Couplings are manufactured to meet and exceed the changing requirements of the drainage marketplace. Adaptor Couplings provide a solution to connecting pipes of different outside diameters. The coupling is a stepped moulded EPDM sleeve that has different diameters at each end. The sleeve is fitted with two 1.4301 (304) stainless steel clamping bands.

Flexseal Adaptor Couplings are manufactured to meet and exceed the changing requirements of the drainage marketplace. Adaptor Couplings provide a solution to connecting pipes of different outside diameters. The coupling is a stepped moulded EPDM sleeve that has different diameters at each end. The sleeve is fitted with two 1.4301 (304) stainless steel clamping bands.

Flexseal DC135 drain coupling with a shear banded seal, suitable for pipe with an outside diameter of 120mm to 135mm. Manufactured for EPDM rubber, incorporating a Grade 1 304 stainless steel shear band.

Flexseal provides the most extensive range of Standard Couplings available in the marketplace and has revolutionised traditional pipe repair methods over the years. Flexseal Standard Couplings are specifically designed to connect and repair pipes of different materials or sizes used in sewerage, drainage and other underground applications. When excavation work is required to repair a damaged pipe, Flexseal Standard Couplings will reduce the amount of time required and minor differences in pipe diameter can be accommodated. The combination of a durable design and excellent sealing properties when tightened to the correct torque enable the Flexseal Standard Coupling to provide a reliable seal on rough pipe surfaces e.g. concrete, as well as on smooth surfaces e.g. PVC. Standard Couplings can be combined with Flexseal Bushes in order to act as an adaptor between pipelines of differingoutside diameters. Flexseal can also supply the product with nitrile sleeves for use with effluent which may be contaminated with hydrocarbons. Couplings are also available with Grade 1.4401 (316) stainless steel for improved corrosion protection.

Fernco, previously known as Flexseal, manufactures a wide range of couplings that connect rainwater and wastewater pipelines using the internal surface, we call these ‘Icon’ (internal connection) couplings.

Fernco, previously known as Flexseal, manufactures a wide range of couplings that connect rainwater and wastewater pipelines using the internal surface, we call these ‘Icon’ (internal connection) couplings.

One coupling and two seals are required per joint.

ACO MultiDrain™ M100D channels are manufactured from Vienite®, ACO’s sustainable high strength material, which provides high chemical resistance. The channels are available in constant depth, sloping depth and shallow depth units. ACO MultiDrain™ M100D channels listed below are provided with integral galvanised steel protective edge rails. For enhanced durability these rails are manufactured from UltraSTEEL™, a unique material that has improved strength over plain steel.

One coupling and two seals are required per joint.

The ACO sump unit is part of the ACO MultiDrain™ M100D channels, manufactured from Vienite®, ACO’s sustainable high strength material, which provides high chemical resistance. The channels are available in constant depth, sloping depth and shallow depth units to complement the ACO sump. ACO MultiDrain™ M100D channels listed below are provided with integral galvanised steel protective edge rails. For enhanced durability these rails are manufactured from UltraSTEEL™, a unique material that has improved strength over plain steel.

This heavy-duty channel sump unit comes from ACO's durable and dependable 'S' range, part of their impressive array of drainage solutions, offering a flexible and stable platform for challenging projects. Made from durable resin concrete for added structural reliability, these single-piece sump units work alongside the rest of the 'S' range, with minimal excavation required for increased installation rates and decreased fuss on site. The 'S100' variants of the series are designed for tackling projects in the F900 weight class, and the system as a whole boasts an impressive service life alongside strength, making it a reliable workhorse solution for your next drainage challenge.

Hepsleve Clay DS Adaptor D101