Juta

GP Crystalline Active Barrier (CAB) Flex 2C is a fast-drying, two-component grey waterproofing coating system. The A component is a cement-based powder, while the B is a liquid polymer. The presence of the polymer makes the coating system semi-flexible.

GP Sealant is a novel, low modulus expansion joint sealant and adhesive, specially formulated to ensure a bubble-free cure even under high temperature and humidity conditions. The product exhibits excellent thixotropy, allowing its use even in very large voids.

GP TITANBOND is a fully bonded waterproofing membrane that combines the GP TITANBOND membrane with a durable virgin polypropylene geotextile. It is designed for gas, water, and tanking protection of underground structures where harmful ground gases are anticipated.

A 300mm wide by 20m long single-sided self-adhesive tape, designed for use as an under-tape to create lap joints with Titan Bond.

GP TITAN TAPE is double-sided tape features release film on both sides to facilitate easy installation. GP TITAN TAPE is crafted to prevent water, water vapour, air, and gas passage, making it ideal for building construction with damp proof membranes, vapour control layers, and ground gas barriers.

GP TITANTANK is consists of a self-adhesive layer with an upper surface of GP TITANFLEX and a lower surface of siliconised polypropylene release film. TITANTANK is used for gas-proofing, waterproofing, and tanking underground structures where harmful ground gases are anticipated, serving as a post-applied fully bonded membrane.

HYDROLOCK is a mechanically bonded Geosynthetic Clay Liner (GCL) composite comprising pulverised bentonite enclosed between two layers of geotextile. The internal 5 kg of natural sodium bentonite swells upon contact with water to create a low-permeability waterproofing barrier.

Hydrolock Paste is a plastic bentonite paste, specially formulated for structural waterproofing purposes. It is applied to seal and safeguard concrete areas in direct contact with soil. Common applications include sealing pipe penetrations, shafts, levelling voids, and filling honeycombs.

Hydrolock Rail is a galvanised steel wire mesh specifically designed to be used with the Hydrolock Strip. The Hydrolock Rail prevents the displacement of the strip during concrete pouring. It is supplied at a width of 30mm and in lengths of 1.0m.

The HYDROLOCK STRIP is a swellable bentonite joint sealing tape with crystallisation additives. It is used as a water stop in concrete construction joints and has been tested and approved for water pressure up to 7 bar.

PD1700 comprises a high compressive strength cuspate High-Density Polyethylene (HDPE) drainage core with a geotextile filter attached to one side. It can be used alongside GP gas or waterproofing barriers to offer both shielding and drainage for external tanking purposes.

The GP DPC Rolls are crafted as a single-layer, embossed damp proof course with high-performance capabilities, engineered to resist Methane, Carbon dioxide, Radon, and Moisture. They meet stringent standards set by BRE, CIRIA, and BSI (BS EN 14909 and BS8485:2015), ensuring excellent mortar adhesion. This makes them well-suited for vertical and horizontal applications in buildings taller than three storeys.

WP SAM features self-adhesive SBS polymer-modified bitumen with a grey co-extruded polyolefin upper surface and a siliconised release paper lower surface. Engineered for waterproofing underground structures, it effectively blocks RADON and other harmful ground gases.

GP Primer is a specifically developed low-viscosity primer, thinned with an aromatic hydrocarbon to improve tolerance to damp substrates and ensure superior bonding with membranes, surpassing conventional bituminous primers. Its black hue and fluidity make it ideal for use on green concrete, masonry, metal, and wooden surfaces.

GP TITAN OVERTAPE is an adhesive fleece-backed tape designed to seal joints in GP TITANTECH waterproofing systems. It prevents the passage of water, water vapor, air, and gas, making it suitable for use in building construction with damp proof membranes, vapor control layers, and ground gas barriers.