Power Tool Accessories

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

Chemically blackened hardened steel. Replacement for lost or damaged chuck keys. Suitable for 13mm chucks and compatible with Jacobs S2 chucks. 12 teeth 6mm pilot.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

A keyless hand-tightened three jaw chuck that fits drills with 1/2" shaft. Ideal for impact drills up to 750 watt. Sold with an SDS plus adaptor. Suitable for 1.5mm - 13mm drill bits.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

Strong, flexible long-life carbon steel junior hacksaw blades.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards.

General purpose blades for cutting mild steel or soft nonferrous metal. Packed five blades - two 18 TPI and three 24 TPI - on display card.

High speed steel with 5% cobalt. Long-lasting and hard wearing. Cuts any metals including alloys, steels and stainless steels.

Hardened high speed steel designed to cut hard materials such as mild sheet, aluminum abd other non-ferrous metals. MWS- Milled & wavy set teeth fine cut blades. This pattern gives a clean, straight cut. Straight fine cut blade. (bosch equiv. T118A)

High quality carbon steel for use with softer materials, such as hard and soft wood, plastics and laminated boards. GTG- Ground & taper ground teeth. These top quality blades give a clean, quick cut into both wood and plastic. Straight cut blade. (bosch equiv. T101BR)

These high carbon steel (HCS) Jigsaw Blades providing a straight clean cut, suitable for softwood, laminate board and plastic. The HCS body has high strength at lower temperatures. Grout & taper ground (GTG) teeth give a clean quick cut.

For fast, straight cutting of softwood, timber sheet, plastic pipes and profiles. Bayonet fitting HCS blade with side-set milled teeth. Working length 75mm.

High quality carbon steel for use with softer materials, such as hard and soft wood, plastics and laminated boards. GTG- Ground & taper ground teeth. These top quality blades give a clean, quick cut into both wood and plastic. Straight cut blade. (bosch equiv. T144D)

High quality carbon steel for use with softer materials, such as hard and soft wood, plastics and laminated boards. GTG- Ground & taper ground teeth. These top quality blades give a clean, quick cut into both wood and plastic. Straight cut blade. (bosch equiv. T111C)