Reinforcement Accessories

Provides thermal protection for newly laid concrete. Frost blankets help prevent freezing in winter and reduce water evaporation from the concrete during hot summer conditions.

The Dywidag Plastic Cone is intended for use on both ends of the Dywidag ID Form sleeve, providing a 10mm cover to facilitate the easy extraction of the formtie.

Black Soft Annealed Tying Wire stands out as the preferred choice for tying wire, having undergone annealing processes adhering to the highest standards.

Versatile bituminous wood fiber fillerboard serves as an expansion joint filler in concrete slab and wall construction.

Polypropylene Beam Form provides a fast and cost effective method of constructing on site concrete ground beams and pile caps. All sizes are supplied with a 7mm thickness.

High Quality Component from the Dywidag Form Tie System With different Waler Plates, Wing Nuts can be used as anchor nuts both for timber and steel waling’s. They can be fixed and loosened using a hexagon wrench or a threadbar. If necessary, a clamping effect can be attained or overcome by applying hammer strokes to the wings.

Perfect for masonry cavity walls in domestic houses and small commercial buildings of up to three storeys and maximum 15m in height. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. • Tangle free design

High quality pressed plate used in conjunction with Wing Nuts which are designed to spread the load of the Tie Bar into the shuttering.