Formwork & Reinforcement

The Dywidag Plastic Cone is designed to be used on both ends of the Dywidag ID Form sleeve giving 10mm cover allowing easy extraction of the formtie.

Splice bars are used for joining of main reinforcement bars by way of sufficient overlap to create a continuation of cages to ensure structural integrity of the beam. This avoids weak points in the concrete.

403 Concrete Hardener & Dustproofer is crafted with premium silicate resins, formulated to fortify and dustproof new and pre-existing concrete floors, making it ideal for both indoor and outdoor usage.

Intersig's High Chairs are designed for supporting bars and mesh on site and in the precast factory. Their unique design eliminates any danger of puncturing the Damp Proof Membrane on ground floor slabs. Also known as Hystools and Deck Chairs.

Black Soft Annealed Ting Wire is the most popular Tying Wire and is annealed to the highest standards.

Intersig's heavy duty high chairs are manufactured with larger wires for supporting heavier bars and mesh on site and in the precast factory. Their unique design eliminates any danger of puncturing the Damp Proof Membrane on ground floor slabs. Also known as Hystools and Deck Chairs.

Large lateral cut-outs allows for free flow of concrete.

WISAblock provides a safe, efficient and cost-effective rebar protection method guarding against impalement and the threat of other serious injury posed by exposed, or poorly protected steel starter bars on concrete substructures.

Multi purpose bituminous Wood Fibre fillerboard is used as an expansion joint filler for concrete slab and wall construction.

Trik Track Plasti Spacer for light easy continuous stable support for mesh and reinforcement. Large lateral cut-outs allows for free flow of concrete.

A comprehensive range of clip-on plastic wheel spacers suitable for all pre-cast and site applications.

Polypropylene Beam Form provides a fast and cost effective method of constructing on site concrete ground beams and pile caps. All sizes are supplied with a 7mm thickness.

High Quality Component from the Dywidag Form Tie System With different Waler Plates, Wing Nuts can be used as anchor nuts both for timber and steel waling’s. They can be fixed and loosened using a hexagon wrench or a threadbar. If necessary, a clamping effect can be attained or overcome by applying hammer strokes to the wings.

Perfect for masonry cavity walls in domestic houses and small commercial buildings of up to three storeys and maximum 15m in height. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. • Tangle free design

High quality pressed plate used in conjunction with Wing Nuts which are designed to spread the load of the Tie Bar into the shuttering.

Splice bars are used for joining of main reinforcement bars by way of sufficient overlap to create a continuation of cages to ensure structural integrity of the beam. This avoids weak points in the concrete.