Saint Gobain Abrasives

Clipper Classic Beton Fits Cutting Concrete, Reinforced Concrete & Hard Building Materials

230mm Atlas Diamond blade designed for cutting general purpose bricks and blocks. 230mm diameter, 7mm high segment, 22.23mm centre bore. Maximum operating speeds up to 230mm = 80m/s and up to 350mm = 100m/s. EN13236

The Atlas General Purpose Diamond Blade 300mm is suitable for cutting general building materials, including: bricks & blocks, paving slabs, concrete and clay pipes. Can be used for dry or wet cutting , Fast cutting speed and for use on general purpose building materials. Application: Cutting of building materials. Sintered segmented blade. Maximum operating speeds up to 230mm = 80m/s; and up to 350mm = 100m/s. EN13236.

The Norton Clipper Flat Metal Cutting Disc is often used in hand-held, specialized power tool ideal for cutting hard materials such as ceramic tiles, ferrous metal at greater speeds. It measures 115 x 2.50 x 22.23mm (Dia x T x Bore Dia). The ultra-thin design allows for more precise cuts and draws less power from the grinder. The cutting speed is very high, which reduces the amount of metal removed and the heat generated. Made in the United States of America, this disc is used in both domestic and commercial purposes. Norton provides high-quality services for exterior construction products and offers a wide range of performant diamond blades, saws and core drills.

Norton Clipper Flat Metal Cutting Disc 2.5 x 230mm (T x Dia) is used for cutting through hard as well as thick materials. Produces straight and accurate cuts with reduced down time. The centre bore measures 22.23mm in diameter. Ideal for cutting all metals including stainless steel.

Norton Clipper Flat Metal Cutting Disc 3.5 x 300mm (T x Dia) is used for cutting through hard as well as thick materials. Produces straight and accurate cuts with reduced down time. The centre bore measures 22.23mm in diameter. Ideal for cutting all metals including stainless steel.

Norton Clipper Metal Grinding Disc 6 x 115mm (T x Dia) is used for removing excess material from welds. Developed for ultimate smooth performance and consistent grinding of stone materials. The centre bore measures 22.23mm in diameter. Ideal for cutting all metals including stainless steel.

Norton Clipper Metal Grinding Disc 6 x 230mm (T x Dia) is designed for removing excess material such as welds, bevelling and edge grinding. This disc free from iron, sulphur and chloride helps eliminate contamination while grinding. It has maximum operating speed of 80 meter per second.

Norton Clipper PRO 2x2 is a laser-welded diamond blade, suitable for cutting a wide range of materials, from asphal and abrasive materials to concrete and reinforced concrete.