Screws

Tension-free, structural screw anchor suitable for heavy loads and small centre-to-centre distances and edge distances. For concrete, sand-lime brick and masonry. ETA approved for structural permanent attachments in both the tension and compression zones of concrete. Integrated pressed-on flange with locking profile under the head. Dimensions listed on top of anchor for possible inspection. Beautiful finish on visible work.

Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin.

A versatile, torque controlled through fixing for use in a wide range of anchoring applications into concrete. Complete with hex full nut and washer. NOTE: If no torque wrench is available, tighten the nut 3 to 4 full turns from finger tight.

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness.

Grade 8.8 steel bolt with a hex head for use with spanners or sockets. Part-threaded design ideal for high-strength fastening. Bright Zinc Plated for corrosion resistance and conforms to DIN 931.

Hex head self-drilling screws, for joining roofing sheets to light section steel (Max. 5.0mm) without the need to pre-drill a hole. • Fire Classification - A1