Sympafix BV

Internal threaded anchor without collar for hanging from threaded rods in concrete. Due to the lack of a collar, it is easy to lubricate in the wall for temporary attachments. Install only with matching Sympafix impact pin. The drop-in anchor is correctly installed once the flared edge of the drop-in pin touches the collar of the anchor. ETA approved for multiple fastenings in both the tensile and compression zones of concrete. Also provided with fire approval for 120 minutes.

200mm Mixing Nozzle Extension for use with Sympafix chemical anchors in deeper drill holes. Ensures correct mixing, reliable fastening, and air-free filling.

500mm Mixing Nozzle Extension for Sympafix chemical anchors. Designed for drill holes up to 625mm, ensuring correct mixing and air-free mortar application.

1000mm Mixing Nozzle Extension for Sympafix chemical anchors. Designed for deep drill holes up to 1125mm, ensuring correct mixing and air-free mortar application.

The PA-32 Washers and Pins for Sympafix PX60M offer reliable fixing performance in hard concrete. Featuring a plastic centring washer and a rolled ballistic point for precise, powerful fastening. Supplied in a 100-pack (32 × 3.7 mm).

The PA-44 Washers and Pins for Sympafix PX60M deliver strong, precise fixings in hard concrete. Featuring a plastic centring washer and rolled ballistic point for maximum penetration and performance. Supplied in a 100-pack (44 × 4.7 mm).

Single shot nail for the Sympafix PX-60M powder-actuated tool. Also suitable for all front-loading powder-actuated tools with an internal barrel diameter of 5-7mm

Single shot nail for the Sympafix PX-60M powder-actuated tool. Also suitable for all front-loading powder-actuated tools with an internal barrel diameter of 5-7mm

Single shot nail for the Sympafix PX-60M powder-actuated tool. Also suitable for all front-loading powder-actuated tools with an internal barrel diameter of 5-7mm

Disc loads to fit PX60M

Strip loads to fit most powder tools

Tension-free, structural screw anchor suitable for heavy loads and small centre-to-centre distances and edge distances. For concrete, sand-lime brick and masonry. ETA approved for structural permanent attachments in both the tension and compression zones of concrete. Integrated pressed-on flange with locking profile under the head. Dimensions listed on top of anchor for possible inspection. Beautiful finish on visible work.

Galvanized through anchors / clickers for fast, reliable, approved, heavy-duty fixings in cracked and non-cracked concrete. With stainless steel expansion clip so that the part of the anchor where the load capacity is built up is not subject to corrosion. Placement depth marking on each anchor prevents incorrect installation. ETA approved for structural permanent attachments in both the tension and compression zones of concrete.

Galvanized through anchors / clickers for fast, reliable, approved, heavy-duty fixings in cracked and non-cracked concrete. With stainless steel expansion clip so that the part of the anchor where the load capacity is built up is not subject to corrosion. Placement depth marking on each anchor prevents incorrect installation. ETA approved for structural permanent attachments in both the tension and compression zones of concrete.

Galvanized through anchors / clickers for fast, reliable, approved, heavy-duty fixings in cracked and non-cracked concrete. With stainless steel expansion clip so that the part of the anchor where the load capacity is built up is not subject to corrosion. Placement depth marking on each anchor prevents incorrect installation. ETA approved for structural permanent attachments in both the tension and compression zones of concrete.

34 degrees rough construction wood nails on paper strip. Suitable for all 34 degree battery, pneumatic or gas operated nail guns, including the Sympafix W90 and W100, Paslode® IM350 and Hilti® GX90-WF.

34 degrees rough construction wood nails on paper strip. Suitable for all 34 degree battery, pneumatic or gas operated nail guns, including the Sympafix W90 and W100, Paslode® IM350 and Hilti® GX90-WF.