Building Materials

PRB Accrofix Pate is designed for application on masonry and concrete surfaces with a smooth finish that exhibit low porosity and high absorption.

This sleek, highly durable and precision-manufactured concrete kerb system has been incorporated into highway schemes up and down the UK. British Standard Kerb uses hydraulic pressing in the manufacture of standard natural kerb, channel and edging to provide consistent long-term performance. Manufactured to the dimensions required in BS EN 1340:2003, this product is available with a wide range of ancillary products to allow for seamless integration with a minimum of cuts. Marshalls' commitment to quality means you can be confident that you're installing concrete kerb units that adhere to strict guidelines as well as having great aesthetics.

1.High bending strength 2.Strong nail holding 3.Moisture-proof and easy work 4.Tight construction and high strength 5.No ratten or decay 6.Low formaldehyde emission 7.The productions are suitable for the construction of viaduct and tall frame building 8.If put in boiling water for 48 hours,it still glue sticking and still formed 9.If used abide by illustration strictly,it can be reuse more than 50 times 10.Solve the problem of leaking and rough surface during construction process

20mm all-in ballast is a 50/50 blend of 20mm gravel and sharp sand that can be used for making concrete, sturdy sub-bases and general building use.

A mixer designed for professional and rental users. Built for site durability, these are quality, portable mixers for all small to medium building projects. The number one choice for mixers worldwide.

Drizoro Maxseal Flex is made up of two components, the first is a water based acrylic resin and the second is a mortar made up of special cements additives and high grade aggregates.

GP TITANBOND is a fully bonded waterproofing membrane that combines the GP TITANBOND membrane with a durable virgin polypropylene geotextile. It is designed for gas, water, and tanking protection of underground structures where harmful ground gases are anticipated.

Krystol Waterstop Grout is a crystalline grout used to create an internal or external waterstop at construction joints, pipe penetrations, tie-holes and control joints.

NATCEM 35, an eco-friendly mortar with swift setting and rapid strength development, is suitable for installation at any thickness, beginning at a minimum of 10mm.

The G951 Peep Weep provides an unobtrusive solution to cavity wall drainage requirements. The weep features a mortar key to ensure adhesion to the building fabric and an external rib to aid positioning. The rib surrounds a 62mm high opening to prevent mortar blockage from within the cavity. The weep’s protective hood which when fitted “peeps” out from the brick fascia is designed to guard against blockage during installation and stops penetration of wind driven rain. The exit hole is ample for water drainage but small enough to prevent entry of large insects.

Classic Tal is a sub-render designed for both exterior and interior walls in a wide range of housing and commercial structures. It is compatible with substrates like blockwork, cement, or poured concrete.

This sleek, highly durable and precision-manufactured concrete kerb system has been incorporated into highway schemes up and down the UK. British Standard Kerb uses hydraulic pressing in the manufacture of standard natural kerb, channel and edging to provide consistent long-term performance. Manufactured to the dimensions required in BS EN 1340:2003, this product is available with a wide range of ancillary products to allow for seamless integration with a minimum of cuts. Marshalls' commitment to quality means you can be confident that you're installing concrete kerb units that adhere to strict guidelines as well as having great aesthetics.

The G961 Extension Sleeve allows the vent to reach a further two brick courses vertically. The sleeve can also be fitted to the base of a telescopic underfloor void ventilator to provide horizontal extension through larger cavities.

A 300mm wide by 20m long single-sided self-adhesive tape, designed for use as an under-tape to create lap joints with Titan Bond.