Building Materials

Krystol Waterstop Grout is a crystalline grout used to create an internal or external waterstop at construction joints, pipe penetrations, tie-holes and control joints.

NATCEM 35, an eco-friendly mortar with swift setting and rapid strength development, is suitable for installation at any thickness, beginning at a minimum of 10mm.

Sika Parex CS Grout is a Portland cement-based product renowned for its high strength, high flow characteristics, and non-shrink properties. Through precise control of water content, diverse consistencies, including liquid, plastic, and mortar, can be attained. This grout, when appropriately placed, imparts substantial structural support and exhibits exceptional resistance to vibrations.

The G951 Peep Weep provides an unobtrusive solution to cavity wall drainage requirements. The weep features a mortar key to ensure adhesion to the building fabric and an external rib to aid positioning. The rib surrounds a 62mm high opening to prevent mortar blockage from within the cavity. The weep’s protective hood which when fitted “peeps” out from the brick fascia is designed to guard against blockage during installation and stops penetration of wind driven rain. The exit hole is ample for water drainage but small enough to prevent entry of large insects.

Classic Tal is a sub-render designed for both exterior and interior walls in a wide range of housing and commercial structures. It is compatible with substrates like blockwork, cement, or poured concrete.

This sleek, highly durable and precision-manufactured concrete kerb system has been incorporated into highway schemes up and down the UK. British Standard Kerb uses hydraulic pressing in the manufacture of standard natural kerb, channel and edging to provide consistent long-term performance. Manufactured to the dimensions required in BS EN 1340:2003, this product is available with a wide range of ancillary products to allow for seamless integration with a minimum of cuts. Marshalls' commitment to quality means you can be confident that you're installing concrete kerb units that adhere to strict guidelines as well as having great aesthetics.

The G961 Extension Sleeve allows the vent to reach a further two brick courses vertically. The sleeve can also be fitted to the base of a telescopic underfloor void ventilator to provide horizontal extension through larger cavities.

A 300mm wide by 20m long single-sided self-adhesive tape, designed for use as an under-tape to create lap joints with Titan Bond.

The inclusion of the Hard-Cem integral admixture not only substantially reduces the necessity for replacements and repairs but also prolongs the lifespan of the concrete by more than double. This leads to a decreased carbon footprint over the entirety of its existence.

Paddiform 4.8m 4x3 Wet Ungraded Formwork Timber, CU-COC-826730 FSC MIX 70% certified. Suitable for temporary structures and concrete formwork.

Parex Dry Pack C, a single-component cement mortar, excels in construction materials. Pre-packaged for quality assurance, it's easy to mix and apply, countering shrinkage effectively. Pre-packaged to ensure consistent quality. Simple to mix and apply.

PRB MONOMESH acts as a strengthening component for PRB mineral one-coat (monocouche) systems, topcoat, and basecoat renders.

Triple cover concrete spacers are ideal for vertical reinforcement, offering three cover options. Their minimal contact with formwork reduces blemishes and ensures precise positioning.

This sleek, highly durable and precision-manufactured concrete kerb system has been incorporated into highway schemes up and down the UK. British Standard Kerb uses hydraulic pressing in the manufacture of standard natural kerb, channel and edging to provide consistent long-term performance. Manufactured to the dimensions required in BS EN 1340:2003, this product is available with a wide range of ancillary products to allow for seamless integration with a minimum of cuts. Marshalls' commitment to quality means you can be confident that you're installing concrete kerb units that adhere to strict guidelines as well as having great aesthetics.

Type: Concrete Padstone Length: 440mm Height: 100mm Width: 215mm

GP TITAN TAPE is double-sided tape features release film on both sides to facilitate easy installation. GP TITAN TAPE is crafted to prevent water, water vapour, air, and gas passage, making it ideal for building construction with damp proof membranes, vapour control layers, and ground gas barriers.

Krytonite Swelling Waterstop is a synthetic rubber waterstop that uses swelling pressure to seal concrete construction joints and stop water.