Internal threaded anchor without collar for hanging from threaded rods in concrete. Due to the lack of a collar, it is easy to lubricate in the wall for temporary attachments. Install only with matching Sympafix impact pin. The drop-in anchor is correctly installed once the flared edge of the drop-in pin touches the collar of the anchor. ETA approved for multiple fastenings in both the tensile and compression zones of concrete. Also provided with fire approval for 120 minutes.
The Faithfull Mini Pistol Grease Gun develops up to 3,500psi/240bar with two optional nozzle locations, this compact pistol style appliance is ideal for access to grease nipples in confined spaces and is suitable for both professional and DIY use. A useful feature is the dual choice alternative of filling by suction or with a 3oz cartridge.
Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
Hardened nail with a loose washer specifically designed for fixing thin sheet materials like plastic trunking and cable trays to masonry and concrete blocks.
Easy reach and compact connectors make the NLG Lightweight Coil Lanyard the ultimate scaffolding tool lanyard for spanners and ratchets along with other small hand tools at height.
Zinc-plated for corrosion resistance. 2 tines bend during installation to create secure fixing. Removable and reusable. Includes assorted sizes: 1.6x25, 2.4x25, 2.4x38, 3.2x32, 3.2x50 and 4.0x64mm. Handy storage case with compartments.
SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140. Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.
Galvanized through anchors / clickers for fast, reliable, approved, heavy-duty fixings in cracked and non-cracked concrete. With stainless steel expansion clip so that the part of the anchor where the load capacity is built up is not subject to corrosion. Placement depth marking on each anchor prevents incorrect installation. ETA approved for structural permanent attachments in both the tension and compression zones of concrete.
YZF 8x85/120 Nylon hammer screw pack 100 8x85/120 - pre-assembled screw and countersunk head, for, among other things, fixing wood to concrete. The plug is made of high-quality nylon, the screw body is made of galvanized steel. When the screw is hammered in, the nylon plug spreads open and anchors itself in the material.
Everbuild Accelerator & Frostproofer is a liquid additive formulated to accelerate setting and hardening times of mortar, concretes, screeds and rendering to provide frost protection during the setting period. Effective even in sub-zero temperatures and can also be used in normal temperatures where a rapid set is required and as a plugging admixture.
Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.
The FIS DM S Pro manual dispenser is compatible with 150 ml, 300 ml, 360 ml, and 390 ml cartridges. Its ergonomic design ensures comfortable handling and quick installation with minimal fatigue. Built with a fiberglass-reinforced plastic housing, it is highly durable and suited for tough conditions. When used with compatible fischer injection mortars, it forms a precisely coordinated system for optimal performance.