Screws, Nails & Fixings

General use with full round head for clamping. Bright nails are self coloured and have no plating.

34 degrees rough construction wood nails on paper strip. Suitable for all 34 degree battery, pneumatic or gas operated nail guns,

5m Adjustable Work Positioning Lanyard - Fixed Rope Grab + 2 Karabiners Can be used for restraint or work positioning applications such as IPAF and telecommunication pole use.

Clamping sleeves with reinforced head made of spring steel, self-aligning in the drill hole by the tapered tip.

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

Everbuild 2-Part High Performance Wood Filler is a fast-drying, exterior and interior wood filler. It is easy to mix and apply, and is completely weatherproof. Once mixed, the filler sets hard to a shatterproof finish in approximately 30 minutes and may be drilled, carved or planed once dry.

A traditional and commonly used washer for clamping and spacing applications. Plated in Trivalent Chromium (Cr3) Zinc

Hardened nail with a loose washer specifically designed for fixing thin sheet materials like plastic trunking and cable trays to masonry and concrete blocks.

General use with full round head for clamping. Bright nails are self coloured and have no plating.

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140. Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

34 degrees rough construction wood nails on paper strip. Suitable for all 34 degree battery, pneumatic or gas operated nail guns

Eyelet collets for suspending non-structural light fixtures. Made of spring steel, self-aligning in the drill hole due to the tapered tip.

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

Everbuild General Purpose Silicone is a Multi-Purpose acetoxy cure silicone sealant that cures quickly to provide a permanently flexible, high strength waterproof seal. It contains a powerful anti-fungicide to prevent mould growth.

A traditional and commonly used washer for clamping and spacing applications. Plated in Trivalent Chromium (Cr3) Zinc.

SharpShooter Type G Heavy-Duty Staples. Also known as Type: 4, 11 or 140. Fit Stanley: 69-809, TR60, TR100 series, TR200 series, TRE500 series, PHT150, G11, TR75, TR150HL, TR250 and TR350 heavy-duty hand tackers, HT150, HT350 and FatMax® hammer tackers and 4-in-1 staplers, within their range capacities.

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Partially threaded.

Everflex One Hour Caulk / Flexible Decorators Filler is a fast drying flexible decorators filler and sealant which can be overpainted with all paint types, or covered over with wallpaper. No sanding down is required.